![]() |
|
|
|
|
|
|
|
|
|
| The BETALUX ability to provide a radial 'bat wing' light distribution sends
light where you want it, i.e. onto vertical surfaces, into shelving and display gondolas, under equipment and penetrates
into enclosures, engine compartments and trucks etc. BETALUX is designed to be spaced far apart (up to 3 times mounting height) thus further reducing costs, installation and energy consumption. The superbly designed refractor is a model of even flashing and redirectional prisms which allow light to reach into the darkest recesses. Perhaps most important of all, people look good because of the soft modelling effect inherent in a more horizontal emitted light. Intense reflections are also supressed - in short better quality lighting. |
Luminous Intensity Distribution Curve![]() (Typical Vertical Curve for 250W coated metal halide lamp - Symmetrical Distribution) |
Features - The BETALUX Control Gear Housing is mounted separately from the optical assembly. The injection moulded acrylic refractor is held tight to the reflector compressing a neoprene extrusion thus sealing the optical chamber (meets requirement of IP65). There is a safety link between the refractor and the reflector to prevent accidental dislodgement during relamping. BETALUX can operate in ambients up to 45oC. The injection moulded Acrylic non yellowing refractor is secured to the reflector by low profile stainless steel clips allowing rapid lamp change from below. |
| iA Comprehensive Photometric Data report for each
lamp type is available on irequest along with a Floppy Disk of N.A.I.E.S. Format Data. Contact us now. |
|
|
|
|
|||