|
|
|
|
|
|
|
The Higlow 1000W luminaire is used at mounting heights from around
20m and up usually using 1000 Watt Mercury Vapour, Metal Halide or High Pressure Sodium lamp (also 400 Watts if
required). The all Australian construction of the WADCO Higlow means that the design has taken into account the special climatic consideration encountered in our tropical north as well as arduous industrial interior. The Higlow accomodates ballasts for all light sources and is rated 50o and 55o Centigrade ambients in a remote gear version. The Luminaire is eminently suitable for use in foundries, chemicals and rubber manufacture, cement and aluminium production. It has been used in Jumbo aircraft hangars lighting and the largest steel mills. The sealed luminiare complies with the requirements of IP65. An S/S version is available. The Higlow 400 and 1000 Control Gear enclosure can be mounted separately from the optical assembly and is replaced by a small casting containing a terminal block. This reduces the overall heights of the luminiare for low profile situations. It also allows the luminiare to be used in higher ambient temperature locations which may be encountered in tropical and hot industrial applications. A generously designed control gear enclosure box allows an Intergral ambient limit at a high 55oC and higher when gear is remote. |
|
Luminous Intensity Distribution Curve (Typical Vertical Curve for 400 & 1000W phosphor coated metal halide lamp - Symmetrical Distribution) |
Features The Higlow luminaire incorporates the most advanced and sophisticated design available in indoor lighting. Top quality components coupled with superior performance features assure more light longer, safer and lowest total cost at higher mounting heights. The Higlow luminaire delivers the lowest total cost of light wherever dirt, grime and fumes limit optimum light efficiency. The optical assembly is totally enclosed, gasketed and filtered to keep contaminants from reaching the lamp, reflector or inside of the visor glass. |
|
It incorporated an armour plate tempered glass visor contained in a stainless steel rim band secured by stainless steel catches to the reflector and fitted with a safety chain for relamping. The lampholder position is adjustable to cater for different types and sizes of lamps and to vary flux distribution. The reflector has a thermal band to minimise lamp relections back through the arc tube of the lamp (which would have the effect of raising its temperature and reducting its life and output.) |
|
iA Comprehensive Photometric Data report for each
lamp type is available on irequest along with a Floppy Disk of N.A.I.E.S. Format Data. Contact us now. |
|
- |
|
ASTROLUX LOW PROFILE, LOW MOUNTING & LOW GLARE with standard rod suspension Applications |
|
|
* Shopping Malls - replaces flourescents | * Supermarkets - Energy saving lamps |
| * Aisle Lighting - Brilliantly illuminates vertical ..gondala surfaces | * Low Mounting Height: 2 - 6 metres. ..Recommended Wattage: 150W or 250W |
|
| * Public Buildings - Elegant design | * Weight: 5kg |
|
Features Low profile, low mounting and low glare with standard rod suspension. Formed aluminium Reflector finished in white powder coated standard. Injection moulded prismatic refractor. Fully sealed with stainless steel rim band and four clips. Remote control gear housing - with optional surface mounting canned gear. Pendant or suspended hook mounting. Suitable for coated 150W or 250W lamps - Metal Halide or High Pressure Sodium. Standard Reactor / Ignitor Control Gear. Auxiliary Standby Q1 150 / 250 Watt lamp can be fitted. |
 |
t t t |
|
|
|
|
|
|
|||
