|
|
|
|
|
|
|
 |
Standard Features - - High silicon content chip resistant hard wearing - polyester powder coat finish - colour white. - Ambient temperature operation to 55oC. - Tested and constructed for safety and thermal operation - in accordance with Australian Standard AS3137. - Mounting heights from 4 metres. - Multiple mounting options. |
| - Lamp access made easy through the use of quick - release stainless steel catches. - Large refractor to minimise glare and to provide quality -spatial illumination. - Activated carbon filter prevents the ingress of dust and - airborne contaminants to the optical - or reflector chamber. - Australian made virgin acrylic refractor. - Multiple electrical options. - Refractor safety lanyard standard. - Fully sealed and gasketed optical assembly. - Department of Primary Industry Approval. - Cast suspension hook. - 1.5 metres of flex and plug. |
|
|
iA Comprehensive Photometric Data report for each
lamp type is available on irequest along with a Floppy Disk of N.A.I.E.S. Format Data. Contact us now. |
|
- |
|
With gains in efficiency and running costs of around 50%, the ULTRALUX Junior
now becomes the logical choice for such areas as Retail Store applications (recessed or suspended) major building
entrances and foyers, gymnasium and public areas, warehouses and aisle lighting, factory assembly areas, industrial
production areas, aircraft hangars and Food Industry applications. The ULTRALUX Junior low bay luminaire is intended for use in mounting height applications from 3 metres to 6 metres from the floor. It is ideally wired with a 250 Watt Metal Halide, High Pressure Sodium or Mercury Vapour lamp (175 Watt lamps can be used too) and it's large refractor is designed to diffuse glare to comfortable levels and redirect light emitted over a very wide area. It has a mounting height to spacing ratio maximum of 1.8:1 i.e. distance apart to distance from the working plane to the underside of the fitting. |
|
Luminous Intensity Distribution Curve (Typical Vertical Curve for 250W lamp - Symmetrical Distribution) |
Features - The ULTRALUX Junior can be suspended, semi-recessed or fully recessed and there is a metal pan available which suits a 600 x 600mm T-Bar grid. The Reflector has an outer flange which allows for direct to ceiling recessing while the low profile diffuser clips will still operate to permit re-lamping from beow. The fitting is finished in an extrememly hardwearing high silicone content powdercoat in WADCO industrial blue. The interior is similarly treated with a white high reflectivity finish to permit maximum diffusion. There is a safety link between the reflector and the diffuser assembly to facilitate relamping. |
|
The optical chamber is fully enclosed by a special neoprene compressible
extrusion which seals the refractor, rim band and reflector. The sealed optical assembly is then allowed to breathe
through an activated charcoal filter which maintains the interior in an 'as new' condition even in the most adverse
environments (IP65). The injection moulded Acrylic non yellowing refractor is retained in a stainless steel rim band secured to the reflector by low profile stainless steel clips allowing rapid lamp change from below. The ULTRALUX Junior Control Gear enclosure can be mounted separately from the optical assembly and is replaced by a small casting containing a terminal block. This reduces the overall height of the luminaire for low profile situations. It also allows the luminaire to be used in higher ambient temperature locations which may be encountered in tropical and hot industrial applications. A generously designed control gear enclosure box allows an Integral ambient limit at a high 60oC. and higher when gear is remote. |
|
iA Comprehensive Photometric Data report for each
lamp type is available on irequest along with a Floppy Disk of N.A.I.E.S. Format Data. Contact us now. |
 |
|
|
|
|
|
|
|
|||
